A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
您可能感興趣的試卷
你可能感興趣的試題
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
最新試題
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
Thermostatic expansion valves can be adjusted for ().
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()
Which of the listed pumps is NOT a positive displacement pump?()
The major source of chemical contaminants in hydraulic fluid is ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
A salinity indicator is used to determine the ().
The usual symptoms of cavitation in a centrifugal pump is ().