單項(xiàng)選擇題Under regulation 6(2) of MARPOL Annex VI, ships constructed before 19 May 2005 shall be issued with the IAPP Certificate no later than the first scheduled dry docking after 19 May 2005, but in no case later than 19 May 2008. Ships flying the flag of a State which is not a Party to MARPOL Annex VI and which do not carry an IAPP Certificate after the above dates should be treated in accordance with chapter 3 of these Guidelines. Which deficiency listed below may not cause the detention of the vessel by PSC inspection?（）

A、Absence of valid IAPP Certificate, EIAPP Certificates or Technical Files
B、A diesel engine, with a power output of more than 130 kW, which is installed on board a ship constructed on or after 1 January 2000, or a diesel engine having undergone a major conversion on or after 1 January 2000, which does not comply with the NOx Technical Code
C、the sulphur content of any fuel oil being used on board exceeds 4.5% m/m
D、An incinerator installed on board the ship before 1 January 2000 does not comply with requirements contained in appendix IV to the Annex, or the standard specifications for shipboard incinerators developed by the Organization (resolutions MEPC.76(40) and MEPC.93(45))


您可能感興趣的試卷

你可能感興趣的試題

1.單項(xiàng)選擇題Which method listed below is acceptable by classification society to perform hose testing to weather tight hatch covers and closing appliances（）

A、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.
B、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 3,5 kgf/cm2. The nozzle diameter is not to be less than 5mm.
C、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 4,0 kgf/cm2. The nozzle diameter is not to be less than 8mm.
D、This is to be carried out at a maximum distance of 2,0m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.

2.單項(xiàng)選擇題A safety management system that satisfies the requirements of the ISM Code is a system of prevention designed to prevent pollution and improve safety. The safety management system shall include the following functional requirements, please find out the non applicable function（）.

A、A safety and environmental protection policy;
B、Instructions and procedures to ensure safety operation of ships and protection of the environment in compliance with relevant international and flag state legislation
C、Provide a guarantee that there will never be another accident or technical defect
D、Defined levels of authority and lines of communication between and amongst, shore and shipboard personnel