單項選擇題

Click the Exhibit button. Given the following parameters: transmitter output (min): -2 dBm receiver input (min): -28 dBm 15216 Mux and Demux loss: 4.5 dB 16 channels maximum In which sites shown in the exhibit could the 15216 EDFAs be placed to minimize the number of EDFAs needed?()

A. Locations B, C only
B. Locations A, B, C only
C. Locations A, B, D only
D. Locations B, C, D only
E. Locations A, B, C, D


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題The ONS 15216 is a 32-channel system. The ONS 15216 OADMs are capable of adding and dropping one, two, or four channels. How are the OADMs provisioned to add and drop specific channels?()

A. The ONS 15216 OADM can be provisioned to add/drop one, two, or four channels via Cisco Transport Manager (CTM).
B. The ONS 15216 OADM consists only of a four-channel module, and the number of ports utilized determines whether it is a one, two, or four channel OADM.
C. Three separate OADM modules are available for one, two, and four channels. The wavelengths to be dropped and added are programmable via Cisco Transport Manager (CTM).
D. The ONS 15216 OADM consists only of a single-channel module. Two-channel and four-channel support is available by stacking the single-channel module.
E. The ONS 15216 OADM is available in one, two, four channels. There are 32 single-channel OADM modules, 16 two-channel OADM modules, and 8 four-channel OADM modules.

2.多項選擇題

Click the Exhibit button. The exhibit shows a 15454/15216 DWDM system and alarm indications. What are two possible sources of trouble shown in the system?() (Choose two.)

A. fiber failure between Sites A and d 
B. EDFA failure at Site A (clockwise direction)
C. EDFA failure at Site C (clockwise direction)
D. 15216 multiplexer at Site A (counter-clockwise direction)
E. OADM pass-through (West "OUT") failure at site D (clockwise)
F. wavelengths 1 and 3 transmitter failures at Site A (clockwise direction)

3.多項選擇題What are three relevant design considerations when using the 15216 EDFA? ()(Choose three.)

A. dispersion
B. Optical SNR
C. span attenuation
D. four wave mixing
E. receiver sensitivity

4.單項選擇題UPSR protection switching is initiated by (), while BLSR is initiated by ().

A. the K1 SONET byte; the K2 SONET byte
B. the K2 SONET byte;the K1 SONET byte
C. transmitter switching;receiver detection
D. Line Overhead bytes;Path Overhead bytes
E. Path Overhead bytes;Line Overhead bytes

5.單項選擇題On an ONS 15454 node you can tunnel an ().

A. SDH circuit over a SONET network delivering it as an SDH signal
B. SDH circuit over a SONET network delivering it as a SONET signal
C. SONET circuit over an SDH network delivering it as an SDH signal
D. SONET circuit over an SDH network delivering it as a SONET signal

最新試題

The ONS 15216 is a 32-channel system. The ONS 15216 OADMs are capable of adding and dropping one, two, or four channels. How are the OADMs provisioned to add and drop specific channels?()

題型:單項選擇題

What are two important considerations when using 2- or 4-channel 15216 OADMs?() (Choose two.)

題型:多項選擇題

How is a Thin Film filter fabricated?()

題型:單項選擇題

What are three factors that limit the maximum distance of an amplified optical signal without regeneration? ()(Choose three.)

題型:多項選擇題

Click the Exhibit button. When designing a DWDM system with multiple amplified spans, a pre-amp is needed at Site B to (). (Choose three.)

題型:多項選擇題

Which timing mode is appropriate for a SONET NE that is adjacent to a SONET NE using BITS-1 timing source?()

題型:單項選擇題

Click the Exhibit button. What is the maximum allowable loss budget between the ONS 15216 Mux (left side) composite output and the ONS 15216 Demux (right side) composite input, with the optical values given in the exhibit? ()(Assume the worst case loss of 4.5 dB for 15216 200 GHz Mux/Demux and ignore power penalties or extra margin.)

題型:單項選擇題

A 2.5 Gb/s (OC-48 or STM-16) optical signal with a dispersion tolerance of 1200 ps/nm goes through fiber with 18ps/nm*km of dispersion. How many 15216-DCU-350 equivalents are needed for enough compensation after traveling 100 km?()

題型:單項選擇題

If node 2 is accepting line timing from node 1, node 2 will send ()to node 1 as its SSM message.

題型:單項選擇題

Click the Exhibit button. Which type of multiplexer is shown in the exhibit?()

題型:單項選擇題