A.system monitoring
B.security administration
C.operations setup
D.problem management
您可能感興趣的試卷
你可能感興趣的試題
On a cisco 1000 series controller-based access point，the alarm led is flashing red，but the other leds are off.
What is this access point indicating？（）
A.its ip address already exists.
B.it is operating normally.
C.it requires a code upgrade.
D.it has lost contact with the controller.
A.admin
B.users assistant
C.system monitoring
D.power users
E.administrators
F.network operator
Clients using cisco-leap and eap-fast authentication are having no problems logging on to The wireless network， but clients using peap are failing to log on.
Which situation would result in this type of problem？（）
A.posture validation has not been enabled.
B.the aaa server is set to accept both ms-chap v2 and gtc for peap authentication.
C.clients and server are not using certificates.
D.clients have been set to validate the server identity.
A.3
B.6
C.4
D.1
A.create a more effective sales strategy for partners.
B.reinforce customer confidence in partners selling products.
C.provide a consistent， repeatable， and proven method to ensure the network solution that is deployed delivers upon the customer’s goals for reliability and availability.
D.maximize the number of services required to support advanced technologies.
E.more clearly define the roles of account managers， systems engineers， and field engineers.
最新試題
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
You are charges with implementing a secure wireless installation which will provide Internet accessto client devices but will not allow communications between wireless clients.In addition to implementing PSPF or peer-to-peer blocking on the wireless side，which of the following actionsshould you perform on the wired infrastructure？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）