A.Avoid channels with microwave oven noise.
B.Manually remove channels not supported by the VoWLAN clients.
C.Avoid 802.11n 40-MHz wide channels.
D.Automatically avoid nearby radar.
您可能感興趣的試卷
你可能感興趣的試題
A.Wireless client WMM UP classification is translated to a wired DSCP priority.
B.Wireless client 802.11p classification is translated to a wired DSCP priority.
C.Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
D.Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.
E.WLAN configured QoS level is used to set the wired DSCP priority.
F.Wired 802.1p CoS priority is not set.
A.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, and finally to all wireless clients of that Cisco WLC, via wireless multicast.
B.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, and finally to all wireless clients of that Cisco WLC, via wireless unicast.
C.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients via wireless multicast.
D.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients via wireless multicast.
E.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients via wireless unicast.
F.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients via wireless unicast.
A.UP
B.VO
C.VI
D.BK
E.BE
A.must be Cisco Compatible Extensions version 2
B.must be Cisco Compatible Extensions version 3
C.must be Cisco Compatible Extensions version 4
D.must be associated to a Platinum QoS WLAN
E.must be associated to an access point on a Cisco WLC with code version 5.0 or newer
A.Multicast traffic is sent out on Cisco APs at the highest mandatory data rate.
B.Multicast traffic is sent out on Cisco APs at the highest supported data rate.
C.On Cisco APs, multicast traffic and beacons are sent out at the same data rates to maintain a common cell size for normal data as well as multicast data.
D.If there is more than one mandatory data rate, multicast traffic will be sent at the highest mandatory rate and beacons will be sent at the lowest mandatory rate.
E.On Cisco APs, multicast traffic will be sent out at the highest data rate that a client can maintain with the AP.
![](https://static.ppkao.com/ppmg/img/appqrcode.png)
最新試題
What is the payload size of a wireless IP phone in a call using G.711 codec?()
Which configuration is required for a Vocera badge to function properly on a Cisco WLC?()
When designing the coverage area for high call capacity, what two actions should be done with data rates and channels?()
What call performance statistics are reported on the Cisco Wireless IP Phone 7921 user interface?()
For which quality of service parameter should the WLAN for VoWLAN clients be configured?()
Which three are interframe spaces defined in 802.11?()
What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?()
Which three solutions does AirMagnet VoFi Pro Analyzer integrate?()
Which wireless LAN statistics are reported from the Cisco Unified Wireless IP Phone 7921G via a directly connected web browser?()
What is recommended for a wireless LAN infrastructure configuration when using SVP-version SpectraLink phones?()