During voice implementation，
which two required items are configured at an access layer switch connected to an IP phone to provide VoIP communication？（）
A.allowed codecs
B.native VLAN
C.auxiliary VLAN
D.Cisco Unified Communications Manager IP address
E.RSTP
您可能感興趣的試卷
你可能感興趣的試題
A network is deployed using best practices of the enterprise campus network model， including users with desktop computers connected via IP phones. Given that all components are QoS-capable，
where are the two optimal locations for trust boundaries to be configured by the network administrator？（）
A.host
B.IP phone
C.access layer switch
D.distribution layer switch
E.core layer switch
Wireless has been operating correctly in the campus infrastructure. After the wireless controllers are upgraded from LWAPP to CAPWAP， access points no longer boot and operate normally.
What is the most likely issue causing this problem？（）
A.VLAN assignments
B.DHCP option 43
C.PoE
D.ACL
E.QoS
A standalone wireless AP solution is being installed into the campus infrastructure. The access points appear to boot correctly， however， wireless clients are not obtaining correct access. You verify that the local switch configuration connected to the access point appears as the following：
interface ethernet 0/1
switchport access vlan 10
switchport mode access
spanning-tree portfast
mls qos trust dscp
What is the most likely issue causing the problem？（）
A.QoS trust should not be configured on a port attached to a standalone AP.
B.QoS trust for switchport mode access should be defined as "cos".
C.switchport mode should be defined as "trunk" with respective QoS.
D.switchport access vlan should be defined as "1".
A campus infrastructure supports wireless clients via Cisco Aironet AG Series 1230， 1240， and 1250 access points. With DNS and DHCP configured， the 1230 and 1240 access points appear to boot and operate normally； however， the 1250 access points do not seem to operate correctly.
What is the most likely issue causing this problem？（）
A.PoE
B.DHCP with option 150
C.DHCP with option 43
D.DNS
E.switch port does not support gigabit speeds
You work as a network engineer for . You study the exhibit carefully.
What happens when the switch 2 is connected to the rest of the network in the VTP domain Lab_Network？（）
Exhibit：
A.The recently introduced switch 2 removes all configured VLANs throughout the VTP domain.
B.The recently introduced switch 2 creates a STP loop in the VTP domain.
C.The recently introduced switch 2 switches over to VTP transparent mode in order to be included into the VTP domain.
D.A trunk should be configured between the two switches in order to integrate 2 into the VTP domain.
E.The recently introduced switch 2 adds one more VLAN to the VLAN database in the VTP domain.
最新試題
Which two statements are true about BPDU port-guard and BPDU filtering？（）
Which statement is correct about RSTP port roles？（）
Which three statements are true of the Link Aggregation Control Protocol （LACP）？（）
What will occur when a nonedge switch port that is configured for Rapid Spanning Tree does not receive a BPDU from its neighbor for three consecutive hello time intervals？（）
Refer to the exhibit. Initially， LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements are true about the possible result of attaching the second link？（）
During routine maintenance， G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However， after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ？ （）
What is the configured priority value of the Vlan105’s group on DS2 ？（）
Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result？（）
If G1/0/1 on DS1 is shutdown， what will be the current priority value of the Vlan105’s group on DS1 ？（）
What two things will occur when an edge port receives a BPDU？（）