A standalone wireless AP solution is being installed into the campus infrastructure. The access points appear to boot correctly， however， wireless clients are not obtaining correct access. You verify that the local switch configuration connected to the access point appears as the following：
interface ethernet 0/1
switchport access vlan 10
switchport mode access
spanning-tree portfast
mls qos trust dscp
What is the most likely issue causing the problem？（）
A.QoS trust should not be configured on a port attached to a standalone AP.
B.QoS trust for switchport mode access should be defined as "cos".
C.switchport mode should be defined as "trunk" with respective QoS.
D.switchport access vlan should be defined as "1".
您可能感興趣的試卷
你可能感興趣的試題
A campus infrastructure supports wireless clients via Cisco Aironet AG Series 1230， 1240， and 1250 access points. With DNS and DHCP configured， the 1230 and 1240 access points appear to boot and operate normally； however， the 1250 access points do not seem to operate correctly.
What is the most likely issue causing this problem？（）
A.PoE
B.DHCP with option 150
C.DHCP with option 43
D.DNS
E.switch port does not support gigabit speeds
You work as a network engineer for . You study the exhibit carefully.
What happens when the switch 2 is connected to the rest of the network in the VTP domain Lab_Network？（）
Exhibit：
A.The recently introduced switch 2 removes all configured VLANs throughout the VTP domain.
B.The recently introduced switch 2 creates a STP loop in the VTP domain.
C.The recently introduced switch 2 switches over to VTP transparent mode in order to be included into the VTP domain.
D.A trunk should be configured between the two switches in order to integrate 2 into the VTP domain.
E.The recently introduced switch 2 adds one more VLAN to the VLAN database in the VTP domain.
Exhibit：
You work as a network administrator at.You study the exhibit carefully. Three different wireless groups of users （support， staff， guests） are permitted to access the wireless LAN.
Which security policy should be implemented for the users in the guests group？ （）
A.LEAP authentication
B.Primary SSID with open or no WEP authentication
C.Static WEP and authentication
D.Open authentication with WEP plus MAC authentication
You work as a network administrator at， You have been asked to configure 802.1x port-based authentication. You notice that the client workstation is not compatible with 802.1x port-based authentication.
What supported authentication server should be chosen？（）
A.TACACS with LEAP extensions
B.RADIUS with EAP extensions
C.TACACS+
D.LDAP
You work as a network engineer for . You study the switch exhibit carefully.
Which two statements are true？ （）
Exhibit:
A.The trust boundary is not on this switch.
B.It is displaying the AutoQos configuration that was initially applied.
C.Interface Fa0/3 trusts allCoS values.
D.The switch does not trust theCoS values of a Cisco IP phone attached to port Fa0/3.
E.The show auto qos command shows the user-defined QoS settings.
F.The show auto qos command does not display user configuration changes currently in effect.
最新試題
During routine maintenance， G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However， after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ？ （）
Based on the show spanning-tree vlan 200 output shown in the exhibit， which two statements about the STP process for VLAN 200 are true？ （）
During routine maintenance， it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time， DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ？ （）
Refer to the exhibit. The command switchport mode access is issued on interface FastEthernet0/13 on switch CAT1. What will be the result？（）
Refer to the exhibit. Based on the output of the show spanning-tree command， which statement is true？ （）
What two things will occur when an edge port receives a BPDU？（）
Refer to the exhibit. Which Virtual Router Redundancy Protocol （VRRP） statement is true about the roles of the master virtual router and the backup virtual router？（）
DS2 has not become the active device for Vlan103’s HSRP group even though all interfaces are active. As related to Vlan103’s HSRP group. What can be done to make the group function properly ？ （）
Which three statements are true of the Link Aggregation Control Protocol （LACP）？（）
Refer to the exhibit. LACP has been configured on Switch1 as shown. Which is the correct command set to configure LACP on Switch2？（）