A.Executing password recovery is required.
B.The virtual terminal lines are misconfigured.
C.Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
D.Power cycle of NewSwitch will return it to a default configuration.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit.This command is executed on 2960Switch:
2960Switch(config)# mac-address-table static 0000.00aa.aaaa vlan 10 interface fa0/1
Which two of these statements correctly identify results of executing the command?()
A.Port security is implemented on the fa0/1 interface.
B.MAC address 0000.00aa.aaaa does not need to be learned by this switch.
C.Only MAC address 0000.00aa.aaaa can source frames on the fa0/1 segment.
D.Frames with a Layer 2 source address of 0000.00aa.aaaa will be forwarded out fa0/1.
E.MAC address 0000.00aa.aaaa will be listed in the MAC address table for interface fa0/1 only.
A.255.255.255.240
B.255.255.255.254
C.255.255.255.252
D.255.255.255.0
E.255.255.255.248
A.A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network infrastructure
B.Broadcast storms can be mitigated by decreasing the number of broadcast domains,thus increasing their size.
C.A higher level of network security can be reached by separating sensitive data traffic from other network traffic.
D.Port-based vlans increase switch-port use efficient,thanks to 802.1Q trunks
E.A more efficient use of bandwidth can be achieved allowing many logical networks to use the same network infrastructure.
F.Broadcast storms can be mitigated by increasing the number of broadcast domains,thus reducing their size.
G. VLANs make it easier for IT staff to configure new logical groups,because the vlans all belong to the same broadcast domain.
哪個目的地址將被用于主機A發送數據到主機C?()
A.交換機1的IP地址
B.交換機1的MAC地址
C.主機C的IP地址
D.主機C的MAC地址
E.路由器的E0接口的IP地址
F.路由器的E0接口的MAC地址
A.應用
B.網絡
C.傳輸
最新試題
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
請參見圖示。下列哪組設備僅包含中間設備?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()