A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
您可能感興趣的試卷
你可能感興趣的試題
Which series of commands will configure router R1 for LAN-to-LAN communication with router R2? The enterprise network address is 192.1.1.0/24 and the routing protocol in use is RIP.()
A.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.129 255.255.255.192;R1(config-if)# no shutdown
B.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.97 255.255.255.192;R1(config-if)# no shutdown
C.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.4 255.255.255.252;R1(config-if)# clock rate 56000
D.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.6 255.255.255.252;R1(config-if)# no shutdown
E.R1(config)# router rip;R1(config-router)# network 192.1.1.4;R1(config-router)# network 192.1.1.128
F.R1(config)# router rip;R1(config-router)# version 2;R1(config-router)# network 192.1.1.0
請參見圖示。當收到下列幀將會怎么做?()
A.Router1的將剝離的源MAC地址,并將其與MAC地址0000.0c36.6965取代。
B.Router1的將剝離的源IP地址,并將其與IP地址192.168.40.1取代。
C.router1將剝離的目的MAC地址,并將其與MAC地址代替0000.0c07.4320。
D.router1將剝離的目的IP地址,并將其與192.168.40.1的IP地址替換。
E.Router1的將轉發數據包輸出接口的FastEthernet0/1。
F.router1將轉發數據包輸出接口的FastEthernet0/2。
A.4to6 routing
B.6to4 routing
C.binary routing
D.dual-stack routing
E.NextGen routing
A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates
A.A dynamically learned MAC address is saved in the startup-configuration file.
B.A dynamically learned MAC address is saved in the running-configuration file.
C.A dynamically learned MAC address is saved in the VLAN database.
D.Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.
E.Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.
最新試題
請參見圖示。下列哪組設備僅包含中間設備?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中存在多少個廣播域?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
下列哪些是私有IP 地址的地址范圍?()