A.A dynamically learned MAC address is saved in the startup-configuration file.
B.A dynamically learned MAC address is saved in the running-configuration file.
C.A dynamically learned MAC address is saved in the VLAN database.
D.Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.
E.Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.
您可能感興趣的試卷
你可能感興趣的試題
A.172.16.0.0/18
B.172.16.0.0/16
C.172.16.0.0/20
D.172.16.0.0/21
A.added security
B.dedicated bandwidth
C.provides segmentation
D.allows switches to route traffic between subinterfaces
E.contains collisions
Refer to the exhibit.Assume that the routing protocol referenced in each choice below is configured with its default settings and the given routing protocol is running on all the routers. Which two conditional statements accurately state the path that will be chosen between networks 10.1.0.0 and 10.3.2.0 for the routing protocol mentioned？ （）
A.If OSPF is the routing protocol， the path will be from R1 to R3 to R4 to R5.
B.If OSPF is the routing protocol， the path will be from R1 to R2 to R5.
C.If OSPF is the routing protocol， the path will be from R1 to R5.
D.If RIPv2 is the routing protocol， the path will be from R1 to R3 to R4 to R5.
E.If RIPv2 is the routing protocol， the path will be from R1 to R5.
A.2 through 1001
B.1 through 1001
C.1 through 1002
D.2 through 1005
Refer to the exhibit. SW1 and SW2 have default configurations. What will happen if host 1 sends a broadcast？（）
A. Hosts 2， 3， and 4 will receive the broadcast.
B. Hosts 1， 2， 3， and 4 will receive the broadcast.
C. Host 2 and the Fa0/0 interface of R1 will receive the broadcast.
D. Hosts 1， 2 and the Fa0/0 interface of R1 will receive the broadcast.
E. Hosts 1， 2， 3， 4 and interface Fa0/0 of R1 will receive the broadcast.
F. Hosts 2， 3， 4， and interfaces Fa0/0 and Fa0/1 of R1 will receive the broadcast.
最新試題
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述，哪兩項是正確的？（）
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€邏輯地址范圍？（）
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么？（）
請參見圖示。下列哪組設備僅包含中間設備？（）
PC 無法連接到任何遠程網站，無法ping 通其默認網關，也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常？（）
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口？（）
何時必須使用clock rate 命令配置路由器串行接口？（）
要將數據包發送到遠程網絡，應使用哪種設備？（）
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求，正確的目的套接字?jǐn)?shù)字是什么？（）
請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述？（）