單項選擇題QoS policies are applied on the switches of a LAN. Which type of command will show the effects of the policy in real time?()

A.show command
B.debug command
C.configuration command
D.rommon command


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Which statements are true about EIGRP successor routes (Choose two.)()。

A.A successor route is used by EIGRP to forward traffic to a destination.
B.Successor routes are saved in the topology table to be used if the primary route fails.
C.Successor routes are flagged as "active" in the routing table.
D.A successor route may be backed up by a feasible successor route.
E.Successor routes are stored in the neighbor table following the discovery process.

3.多項選擇題Which three statements are typical characteristics of VLAN arrangements?()

A.A new switch has no VLANs configured.
B.Connectivity between VLANs requires a Layer 3 device.
C.VLANs typically decrease the number of collision domains.
D.Each VLAN uses a separate address space.
E.A switch maintains a separate bridging table for each VLAN.
F.VLANs cannot span multiple switches.

4.多項選擇題A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change?()

A.The IOS image will be ignored.
B.The router will prompt to enter initial configuration mode.
C.The router will boot to ROM.
D.Any configuration entries in NVRAM will be ignored.
E.The configuration in flash memory will be booted.

5.單項選擇題Which command can be used to verify the DLCI destination address in a Frame Relay static configuration?()

A.show frame-relay end-to-end
B.show frame-relay map
C.show frame-relay lmi
D.show frame-relay pvc

最新試題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述?()

題型:單項選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:單項選擇題

傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題

在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()

題型:單項選擇題

PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()

題型:單項選擇題

請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題