單項選擇題A system administrator types the command to change the hostname of a router. Where on the Cisco IFS is that change stored?()

A.NVRAM
B.RAM
C.FLASH
D.ROM
E.PCMCIA


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Which command is used to load a configuration from a TFTP server and merge the configuration into RAM?()

A.copy running-config: TFTP
B.copy TFTP: running-config
C.copy TFTP: startup-config
D.copy startup-config: TFTP

2.多項選擇題Which two commands correctly verify whether port security has been configured on port FastEthernet0/12 on a switch?()

A.SW1#shows withport port-security interface FastEthernet0/12
B.SW1#shows withport port-secure interface FastEthernet0/12
C.SW1#show port-secure interface FastEthernet0/12
D.SW1#show running-config

3.多項選擇題下面哪些是ACL可以做到的?()

A.允許125.36.0.0/16網段的主機使用FTP協議訪問主機129.1.1.1;
B.不讓任何主機使用Telnet登錄;
C.拒絕一切數據包通過;
D.僅允許某個用戶從外部登錄,其他用戶不能這樣做。

4.多項選擇題What are two reasons that a network administrator would use access lists (Choose two.)()。

A.to control vty access into a router
B.to control broadcast traffic through a router
C.to filter traffic as it passes through a router
D.to filter traffic that originates from the router
E.to replace passwords as a line of defense against security incursions

5.單項選擇題Which command is used to copy the configuration from RAM into NVRAM?()

A.copy running-config startup-config
B.copy startup-config: running-config
C.copy running config startup config
D.copy startup config running config
E.write terminal

最新試題

傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()

題型:單項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()

題型:多項選擇題

請參見圖示。下列哪組設備僅包含中間設備?()

題型:單項選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:單項選擇題

請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()

題型:多項選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題