A.opening more bypass lines
B.opening additional expansion valves
C.adding refrigerant
D.speeding up the machine
您可能感興趣的試卷
你可能感興趣的試題
A.manifold
B.condenser
C.chamber
D.plenum
A.defective thermal bulb
B.clogged scale trap
C.stuck high-pressure switch
D.stuck low-pressure switch
A.insufficient refrigeration
B.leaky suction valves
C.expansion valve stuck open
D.suction valve not adjusted properly
A.too much cooling water going through the condenser
B.not enough refrigerant in the system
C.a leak in the evaporator coils
D.no enough cooling water going through the condenser
A.king valve and the expansion valve
B.solenoid valve and expansion valve
C.evaporator and receiver
D.compressor and evaporator
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
Cold weather starting of a diesel engine may be made easier by（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To proceed to the assistance of a ship in distress is（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The main purpose of port State control is not to（）
If separating effect is not good, which measure should be taken （）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）