A.the running hours of the cooling water pump
B.chief engineer’s order
C.the main parameters of main and auxiliary equipment
D.the position of the vessel
您可能感興趣的試卷
你可能感興趣的試題
A.made and noted as required by the duty engineer
B.reported to chief engineer immediately after being made by duty engineer
C.never made before getting permission from chief engineer
D.made as required but not logged
A.the main propulsion plant
B.lifesaving jackets
C.lifeboat engine
D.state of emergency generator
A.the common ground point
B.the starter’s frame
C.the commutator
D.the starter’s mounting bolts
A.flame retardant
B.moisture resistant
C.oil resistant
D.low conductivity
A.Ring type
B.Fork type
C.Spade type
D.Push on pull off type
![](https://static.ppkao.com/ppmg/img/appqrcode.png)
最新試題
Diesel engine air start system check valves are opened by ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The condensers located in various stages of a flash evaporator are cooled by()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
The main purpose of port State control is not to()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
The ISPS Code consists of a mandatory section-Part A, which shows()