A.length of the crankshaft
B.volume of the clearance space
C.weight of piston
D.length of the stroke
您可能感興趣的試卷
你可能感興趣的試題
A.brake horsepower
B.displacement
C.cylinder volume
D.cylinder clearance
A.TBN of the lubricating oil
B.Temperature of the lube oil
C.Completeness in the mixing of the fuel and air
D.Temperature of the cooling (sea) water
A.starting air pressure
B.scavenge air pressure
C.over-speed trip
D.banjo oiler line
A.starting air pressure
B.scavenge air pressure
C.over-speed trip
D.banjo oiler line
A.engine speed
B.kilowatt load
C.fuel injection pressure
D.air intake manifold temperature
最新試題
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
（） is not installed on the main switchboar.
The condensers located in various stages of a flash evaporator are cooled by（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
If separating effect is not good, which measure should be taken （）
Which of the following items don’t belong to dock repair works?（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）