A.poor cooling of cylinder walls
B.improper cooling of the piston
C.insufficient piston lubrication
D.all of the above
您可能感興趣的試卷
你可能感興趣的試題
A.natural aspiration
B.masked intake valves
C.air cells
D.scavenging air
A.excessive lube oil consumption
B.lower than normal lube oil temperature
C.higher than normal exhaust back pressure
D.excessive crankshaft end play
A.twice as large as with a cast iron piston
B.the same size as with a cast iron piston
C.half as large as with a cast iron piston
D.the same size as the crown of an aluminum piston
A.increase back pressure during the exhaust process
B.facilitate periodic replacement of the valves
C.reduce the pumping loss associated with scavenging
D.reduce tension on valve springs
A.excessive ring action
B.excessive ring temperature
C.improper ring rotation
D.excessive ring face wear
最新試題
If separating effect is not good, which measure should be taken （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
Using a file without a handle may result in （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
（） is not installed on the main switchboar.
The treatment of the fuel oils involves storage, heating, filtering and（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The shipboard oil pollution emergency plan will be invalid after （）