A.Injection lag
B.Lube oil dilution
C.Pre-ignition
D.Corrosion
您可能感興趣的試卷
你可能感興趣的試題
A.increase thermal efficiency
B.cause clogging of the fuel system
C.increase the ability of the engine to start in cold weather
D.produce corrosion in the cylinder and exhaust system at low loads
A.the engine to run after the fuel has been secured
B.the engine to over-speed
C.a fire
D.all of the above
A.compression pressure in the cylinder will be higher
B.carbon will accumulate behind the ring
C.combustion gases will penetrate beneath the ring land
D.piston side thrust will be increased
A.copper
B.carbon
C.hydrogen
D.sulfur
A.The cylinder indicator cocks should be opened
B.The sump lube oil scavenge pump should be secured immediately
C.The explosion relief valves should be manually opened
D.The crankcase should remain unopened until the engine has cooled
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Using a file without a handle may result in （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The cetane rating of diesel fuel is an indication of the （）
Under MARPOL Code the ship to which it applies has to carry （）
The condensers located in various stages of a flash evaporator are cooled by（）
To proceed to the assistance of a ship in distress is（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）