A.Move the fuel control mechanism to the no fuel position
B.Block the fuel supply by closing the master fuel valve
C.Shut off the fuel supply and block the flow of intake air
D.Relieve all pressure in the fuel system
您可能感興趣的試卷
你可能感興趣的試題
A.airification
B.vaporization
C.atomization
D.gasification
A.reciprocating motion of exhaust valves
B.rotary motion of the camshaft
C.reciprocating motion of the piston
D.developed differential
A.dilutes the lube oil and reduces its viscosity
B.forms sulfuric acid in the lube oil
C.causes pitting and failure of the bearings
D.causes sludge deposits on valve stems
A.To provide accessibility to the cylinder liners
B.To add stability to the engine block
C.To add rigidity to the block and a surface for attaching other parts
D.To make a surface for the base
A.temperature of the exhaust gases
B.energy supplied to the turbocharger
C.air pressure to the intake manifold
D.purge of exhausted gases from the cylinders
最新試題
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
If separating effect is not good, which measure should be taken （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）