A.using a rotary grinder with an installed shield
B.letting go the anchor
C.handling wire rope or natural fiber line
D.painting with a spray gun
您可能感興趣的試卷
你可能感興趣的試題
A.should be coiled in a clockwise direction
B.should be coiled in a counterclockwise direction
C.may be coiled either clockwise or counterclockwise
D.should never be coiled
A.composite
B.left-lay
C.improved
D.preformed
A.Move bodily to port
B.Move bodily to starboard
C.Move in a zig-zag motion
D.Steer a fairly straight course
A.Abreast the heel
B.At right angles to the boom when viewed from above
C.Aft of the heel
D.Forward of the spiderband
A.Effect of the propeller flow on the rudders
B.Water flow due to the vessel's movement through the water
C.Tunnel affect of the water flow past opposing rudders
D.Discharge current being channeled to impinge on the vessel's deadwood
最新試題
At least（）radar transponder shall be carried on each side of every cargo ship of 500 gross tonnage and upwards.
What best describes an anchor buoy（）.
The maximum number of passengers a Vessel may carry（）.
Which of the following statements concerning the rigging of bosuns’ chairs and their use is TRUE（）.
The size of wire rope is determined by the（）.
The best method of protecting that portion of a fiber anchor line nearest the anchor from chafing on the bottom is by（）.
A spanner is a（）.
In the manufacture of wire rope，if the wires are shaped to conform to the curvature of the finished rope before they are laid up，the rope is called（）.
When two lines are spliced together,（）.
When rigging a bosun’s chair，a tail block or lizard is used to（）.