A.lowering brine discharge density
B.decreasing the absolute pressure of each stage
C.increasing the saltwater feed heater temperature
D.increasing the pressure at the spray pipe
您可能感興趣的試卷
你可能感興趣的試題
A.Bedplate
B.Block
C.Base
D.Sump
A.clearance between the top of the valve stem and the rocker arm
B.compression of the valve springs
C.clearance between the valve seat inserts and the head
D.out of roundness of the fuel injection cams
A.low lube oil temperature
B.low lube oil pressure
C.high exhaust temperature
D.high cooling water pressure
A.Dirty lube oil filter
B.Too much piston ring wear
C.High lube oil viscosity
D.Low lube oil temperature
A.The oil oxidizes and forms carbon deposits
B.The viscosity increases
C.Engine oil consumption decreases
D.Lubricating qualities of the oil are enhanced
最新試題
The main purpose of port State control is not to（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
If separating effect is not good, which measure should be taken （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Under MARPOL Code the ship to which it applies has to carry （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The condensers located in various stages of a flash evaporator are cooled by（）
Which of the following items don’t belong to dock repair works?（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）