A.reduce the ring groove wear rate
B.seal against crankcase vapors
C.lessen the wear on aluminum part of the cylinder
D.allow for the greater expansion rate of aluminum
您可能感興趣的試卷
你可能感興趣的試題
A.a leaking fuel injector nozzle
B.a clogged air filter
C.excessively early fuel injection
D.malfunctioning valves
A.An alarm device with audible and visible signals is required for all cooling water systems
B.Propulsion engines with bores over 200 mm are to be fitted with cooling water jackets
C.Each totally enclosed cooling system shall be provided with a suitable head tank
D.Drain cocks are to be provided at the lowest points of all cylinder water jackets
A.turbocharger efficiency
B.engine power output
C.carbon deposits on fuel injectors
D.cylinder scavenging
A.holed
B.fouled
C.clean
D.dry
A.radiated through the engine block
B.transferred to water cooled cylinder walls
C.conducted through the piston crown
D.transferred to escaping exhaust gases
最新試題
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Using a file without a handle may result in （）
The treatment of the fuel oils involves storage, heating, filtering and（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The ISPS Code consists of a mandatory section-Part A, which shows（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.