A.have a larger than normal dead band
B.produce excessive speed response to a load change
C.respond slowly to any change in engine load
D.stabilize engine speed at the new governor setting
您可能感興趣的試卷
你可能感興趣的試題
A.plating forming the engine room tank top
B.doubler plating installed over the flat keel plate
C.a watertight boundary formed by the inner bottom
D.compartments between the inner and outer bottoms
A.auto-ignition point
B.flash point
C.burning temperature
D.fire point
A.double bottom fuel oil tank temperature
B.heater supply steam flow
C.pressure of the fuel supplied to the burners
D.attemperator steam flow in the heater discharge circuit
A.have no plating joints of 90
B.retain the lube oil as long as possible before it recirculates through the system
C.provided drain/return lines that are no greater than 24 inches from the pump suction
D.be provided with only a perfectly horizontal bottom
A.cause an alarm condition
B.secure power to the indicator
C.secure power to the monitored device
D.automatically recluse within 10 seconds
![](https://static.ppkao.com/ppmg/img/appqrcode.png)
最新試題
If separating effect is not good, which measure should be taken ()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Under MARPOL Code the ship to which it applies has to carry ()
The cetane rating of diesel fuel is an indication of the ()
Diesel engine air start system check valves are opened by ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
The ISPS Code consists of a mandatory section-Part A, which shows()
The shipboard oil pollution emergency plan will be invalid after ()
Cold weather starting of a diesel engine may be made easier by()