A.a test valve
B.an inspection valve
C.a stop valve
D.a non-return valve
您可能感興趣的試卷
你可能感興趣的試題
A.The diameter of a disc is the same as the outer diameter of the pipe
B.We can infer that the valve is opened or closed by rotating the spindle
C.A butterfly valve comprises a disc and a ring body
D.The profile of the butterfly valve is a ring body
A.The globe valve may be suitable for partially open operation
B.The globe valve will give full bore flow with change of direction
C.The gate valve gives full bore flow with change of direction
D.The gate valve is suitable for full bore operation only
A.The profile of the valve is like a globe
B.The valve seat is set into the bulbous body
C.The plug or disc of the valve is made vertical to the axis of the pipe
D.The valve seat is located at right side of the plug or disc
A.Flows of fluids can be restricted by both cocks and valves
B.There are seats in the internal passages of valves
C.A disc of valve only moves up and down
D.We can infer that there is a bore in cock ping
A.There is apparent condensate in piping
B.The steam is not discovered after admitting steam
C.The condensate should be fully loaded in the piping as admitting steam
D.The condensate should be fully drained from the piping while admitting steam
最新試題
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The condensers located in various stages of a flash evaporator are cooled by()
Diesel engine air start system check valves are opened by ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Which of the following items don’t belong to dock repair works?()
() is not installed on the main switchboar.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
The main purpose of port State control is not to()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()