A.6 hours
B.12 hours
C.18 hours
D.24 hours
您可能感興趣的試卷
你可能感興趣的試題
A.notify the engineer on watch
B.isolate and secure the piping
C.throw sand on the fire
D.extinguish the fire using a combination nozzle with applicator
A.carbon monoxide
B.oxygen
C.carbon dioxide
D.any gaseous substance
A.evacuate all engine room personnel
B.fight the fire with hand portable extinguishers
C.activate the main CO2 bank
D.stop the flow of leaking fuel oil
A.Any one component can be eliminated to extinguish a fire
B.Any two components must be eliminated to properly extinguish a fire
C.Any three components must be eliminated to properly extinguish a fire
D.Ali four components must be eliminated to extinguish any fire
A.the heat
B.the fuel
C.the oxygen
D.any of the above
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows（）
The treatment of the fuel oils involves storage, heating, filtering and（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Which of the following items don’t belong to dock repair works?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Diesel engine air start system check valves are opened by （）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）