A.steel
B.aluminum
C.glass
D.copper
您可能感興趣的試卷
你可能感興趣的試題
A.suspended by wire slings in one comer of the shop
B.wrapped in several layers of heavy paper or carboard
C.supported by flat wood blocks on the workbench
D.returned to the frame as soon as the bearings are removed
A.frequency
B.number of phases
C.phase rotation
D.All of the above
A.rotor
B.stator
C.exciter
D.armature
A.coulombs per second
B.revolutions per second
C.revolutions per minute
D.cycles per second
A.slightly less than the oncoming generator frequency
B.the same as the bus frequency
C.slightly greater than the bus frequency
D.the same as the bus voltage
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
Which of the following items don’t belong to dock repair works?（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The main purpose of port State control is not to（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
The cetane rating of diesel fuel is an indication of the （）