A.removing all but the frictional load during starting
B.relieving intercoolers of high temperature buildups
C.providing high starting torque in the drive motor
D.seating valve plates during compressor shutdown
您可能感興趣的試卷
你可能感興趣的試題
A.loose expansion valve control bulb
B.low differential setting on the H-Pcutout
C.blown fuse in the motor circuit
D.faulty suction pressure regulator
A.prevent an internal explosion in the pump when it is overheated
B.enable a visual inspection of the pump while it is running
C.insure a proper alignment of the pump coupling to the driver
D.accommodate for friction between the impeller and the easing
A.explosive range
B.flash point
C.ignition temperature
D.combustion temperature
A.the pressure regulating valve is not closing
B.an excessive lack of refrigerant in the system
C.badly leaking discharge valves
D.worn piston rings
A.Both are higher than normal burning temperatures
B.The flash point is always higher
C.The ignition temperature is always higher
D.They are not necessarily related
最新試題
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?（）
One cause of high head pressure occurring in a refrigeration system can be （）.
A salinity indicator is used to determine the （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
A pressure drop through the refrigerant liquid line may cause （）.