A.leaky discharge valves on the LP cylinder
B.leaky discharge valves on the HP cylinder
C.insufficient intercooler cooling
D.low ambient air pressure
您可能感興趣的試卷
你可能感興趣的試題
A.one size larger than the pump discharge nozzle
B.the same size as the pump discharge nozzle
C.one size smaller than the pump discharge nozzle
D.installed with a short radius elbow at the pump
A.purge the condenser if the waterside is dirty
B.check for proper water flow through the condenser
C.increase the high pressure cutout setting
D.reduce the cooling water flow
A.Red
B.White
C.Blue
D.Yellow
A.the flashing of the feed water
B.the condensation of the saltwater feed
C.air ejectors, eductors, or a separate vacuum pump
D.condensation of the distillate
A.under heavy loads
B.during hot gas defrost
C.under light loads
D.during starting conditions
最新試題
The output volume of a positive fixed displacement pump can be changed only by （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
The usual symptoms of cavitation in a centrifugal pump is （）.
One cause of high head pressure occurring in a refrigeration system can be （）.
The general purpose of a heat exchanger is to （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.