A.The cable lifter
B.The hoisting motor
C.The topping wire
D.The life-raft
您可能感興趣的試卷
你可能感興趣的試題
A.stays
B.winches
C.barrels
D.brakes
A.fire-tubes
B.furnaces
C.water drums
D.water wall tubes
A.The three moving vanes and the three fixed vanes form three pressure chambers
B.The three moving vanes and the three fixed vanes form six pressure chambers
C.The three moving vanes and the three fixed vanes form nine pressure chambers
D.The three moving vanes and the three fixed vanes form twelve pressure chambers
A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
最新試題
The rate of heat transfer from a hot region to a cold region is affected most by the ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?()
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
The output volume of a positive fixed displacement pump can be changed only by ().
A salinity indicator is used to determine the ().
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
A pressure drop through the refrigerant liquid line may cause ().
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().